How to get window tint glue off?

Getting leftover window tint glue or adhesive off your car windows can be annoying, but it’s totally doable with the right tools and some patience. Here's a step-by-step guide that’ll leave your glass clean and clear:

How to get window tint glue off?

What You’ll Need to:

• Soapy water or ammonia solution (1 part ammonia to 3 parts water)

• Glass cleaner (ammonia-free if you still have tint on other windows)

• Razor blade or plastic scraper

• Fine steel wool (#0000 grade) (optional, and only for tempered glass — NOT for defrost lines or tinted glass)

• Microfiber cloths

• Spray bottle

• Gloves (if using ammonia)

How to Remove Tint Glue Residue:

Option 1: Soap & Water + Razor Blade (Most Common)

1. Spray the window with warm soapy water (dish soap + warm water).

2. Let it sit for a minute to soften the glue.

3. Use a razor blade (at a shallow angle) or plastic scraper to scrape the glue off the glass.

4. Wipe clean with a microfiber cloth.

5. Repeat until all glue is gone.

   
   

Use this method only on the inside of side windows and not on defrost lines.

Option 2: Ammonia + Plastic Wrap (For Stubborn Adhesive)

1. Spray the glass with ammonia (do this in a well-ventilated area).

2. Cover the wet surface with plastic wrap or a black trash bag to trap the fumes and keep the area moist.

3. Let it sit in direct sunlight for about 30–60 minutes.

4. Remove the plastic and use a plastic scraper or razor blade to peel off softened glue.

5. Clean the surface with soapy water or glass cleaner afterward.

   
   

This method is great for glue that’s been baked onto the glass over time.

Option 3: Rubbing Alcohol or Adhesive Remover

1. Spray rubbing alcohol (isopropyl) or a commercial adhesive remover (like Goo Gone or Sprayway) onto the glue.

2. Let it soak for a couple of minutes.

3. Rub off with a microfiber cloth or use a scraper for tougher spots.

4. Wipe the glass clean.

   
   

Safe for most windows — just avoid overspray on your interior surfaces.

Special Note for Rear Windows (Defrost Lines):

• Do NOT use a razor blade or steel wool directly on the defrost lines.

• Use alcohol, adhesive remover, or ammonia + towel method and rub gently along the lines, not against them.

Pro Tips:

• Work in the shade or a cool garage to prevent the cleaner from drying too quickly.

• Be patient — sometimes it takes a couple of rounds to fully get rid of the glue.

• Always follow up with glass cleaner for a streak-free finish.

this is it this is how to get window tint glue off.

Cleaning glue residue from auto glass